PL15 Oil/Water Separator

A unique concept in on-site condensate treatment for compressors up to 15 kW: 90 cfm (2.5 m³/min) at pressures below 16 barg, in a unit just 270 mm tall.

PURE Line

Small Compressor, Same Legal Duty


Over an 8,000-hour working life, even a small 11 kW compressor produces more than 7,500 litres of condensate carrying several litres of compressor oil, enough to de-oxygenate hectares of open water. Discharging it untreated is illegal, and having it collected by a licensed waste contractor is costly.

The PL15 treats that condensate at source for a fraction of the price. It is a different design from the rest of the PURE Line: a sealed, replaceable service cartridge inside a fixed outer body, so servicing is a twist, a lift and a swap.

  • Quick, secure installation, with wall and floor mounting hardware both included
  • Rapid, no-tools servicing: rotate the lid, lift it off, swap the cartridge
  • No overspray: four levels of protection keep untreated condensate away from the vents
  • Visual Time-in-Service (TIS) indicator
  • Up to 4,000 hours service life from an inexpensive PL15SK cartridge
STERLING PL15 oil/water separator

Specification

PL15 in Detail


Maximum capacity90 cfm (2.5 m³/min) at ≤16 barg
System powerUp to 15 kW
Dimensions (H × W × D)270 × 185 × 195 mm
Dry weight2 kg
Connections6 mm and 8 mm push-fit
Moulded partsPolyethylene
Filter mediumProcessed polypropylene
Service lifeUp to 4,000 hours
Maximum cartridge life24 months, never exceed
Service kitPL15SK

Servicing

Cartridge Life Guide


How long a cartridge lasts depends on how hard the compressor works. Change it at whichever comes first: the months below, or the TIS indicator.

Annual run hours2,0004,0008,000
Light duty24 mo18 mo12 mo
Typical21 mo15 mo9 mo
Arduous18 mo12 mo6 mo

Time-in-Service indicator. A visual indicator clipped into the lid shows at a glance when the cartridge is due. A new TIS indicator comes with every PL15SK.

How it works

Condensate enters through the inlet, directed down and away from the air vents, into a de-pressuriser with a foam diffuser. Inside the cartridge:

  • Primary filtration removes the bulk oil
  • Polishing filtration traps the smaller oil droplets
  • Clean water leaves through the push-fit outlet. It always drains automatically, with nothing to adjust

What's in the box

  • Outer body, lid, cartridge and foam diffuser, fully assembled
  • Wall-mount bracket and optional floor-mount hardware
  • TIS indicator, polybag and installation & maintenance manual

Bigger compressor? See the PL30 to PL480 for systems up to 480 kW, or the PL550 and PL1100 IBC separators above that.

PL15 and PL15SK in stock now

Same-day dispatch from stock at our Cannock warehouse.