Mark

FOD 1481-A service kit

The Mark FOD 1481-A is served by the STERLING CS2400B service kit.

Compatible 8 white, 4 black bags.

Request a quote Full CS2400B detail

Held in stock in the UK. Around 600 service kits sit on the shelf at Cannock. Order before 3pm on a working day and it leaves the same day.

The separator this fits

Placeholder schematic only, not indicative of the actual Mark FOD 1481-A.

The Mark FOD 1481-A is a compressed-air oil/water separator. It uses replaceable filter bags, which is what the STERLING kit on this page supplies. The unit, lid and pipework stay in place.

Check the label on your unit against the part number above. If it does not match exactly, tell us what it says and we will identify it.

What's in the box

12 bags: 8 white particulate, 4 black carbon. Every bag supplied is pictured below, so you can check what arrives against what you ordered.

  • W8, white particulate bag supplied in the STERLING CS2400B service kit × 4

    W8

    White particulate bag

    Ø309 × 700 mm

  • W7, white particulate bag supplied in the STERLING CS2400B service kit × 4

    W7

    White particulate bag

    Ø309 × 200 mm

  • B6, black carbon bag supplied in the STERLING CS2400B service kit × 2

    B6

    Black carbon bag

    Ø328 × 310 mm

  • B7, black carbon bag supplied in the STERLING CS2400B service kit × 2

    B7

    Black carbon bag

    Ø360 × 400 mm

What you are replacing

4 bodies in the kit. Compare against what you removed. Dimensions are given per body, not per kit.

Part number Dimensions
W8 × 4 Ø309 × 700 mm
W7 × 4 Ø309 × 200 mm
B6 × 2 Ø328 × 310 mm
B7 × 2 Ø360 × 400 mm

Full specification for CS2400B →

The same kit also fits these makes

CS2400B is a single kit serving 3 models across 3 manufacturers.

Atlas Copco

Worthington / ABAC

Compatibility. Brand names are used for identification purposes only and do not indicate that STERLING Separation Ltd supplies service kits manufactured or sold by those companies or brands.

Photographs. Kit photographs are our own, taken in house. Separator photographs are indicative: we have made every effort to show the right unit, but a photograph could differ from your model, so always check the part number on your unit's label.

Can't find your separator?

Call us with the model number or a photo of the label and we'll identify the right kit.

01543 502010 Contact Us